Magnetic Products

Approx. Rs 7,250 / PieceGet Latest Price

• Easily Clean up sharp edged drill chips screw and other metal parts.
• Items are safely ejected by Pulling the back side knob.
• Ideal for hard to reach space.
• Used in all fabrication shop and machine shop.
• No requirement of hand contact with scrap to handle, so safe in use.

Approx. Rs 2,300 / PieceGet Latest Price

• Used for removing ferrous chips or particles from blind or tapping holes, corners or slots of machine table.
• Compact design, uses strong magnets.
• Magnet depth is 20mm from one end.
• Stainless steel body to avoid corrosion.
• Special sizes can also be manufactured.
• Magnetic stick with handle is also available.

Approx. Rs 1,700 / PieceGet Latest Price

• Used for removing ferrous chips or particles from blind or tapping holes, corners or slots of machine table.
• Compact design, uses strong magnets.
• Magnet depth is 20mm from one end.
• Stainless steel body to avoid corrosion.
• Special sizes can also be manufactured.
• Magnetic stick with handle is also available.

Approx. Rs 2,100 / PieceGet Latest Price

• Used for removing ferrous chips or particles from blind or tapping holes, corners or slots of machine table.
• Compact design, uses strong magnets.
• Magnet depth is 20mm from one end.
• Stainless steel body to avoid corrosion.
• Special sizes can also be manufactured.
• Magnetic stick with handle is also available.

Approx. Rs 2,000 / PieceGet Latest Price

• Used for removing ferrous chips or particles from blind or tapping holes, corners or slots of machine table.
• Compact design, uses strong magnets.
• Magnet depth is 20mm from one end.
• Stainless steel body to avoid corrosion.
• Special sizes can also be manufactured.
• Magnetic stick with handle is also available.

Approx. Rs 1,600 / PieceGet Latest Price

• Used for removing ferrous chips or particles from blind or tapping holes, corners or slots of machine table.
• Compact design, uses strong magnets.
• Magnet depth is 20mm from one end.
• Stainless steel body to avoid corrosion.
• Special sizes can also be manufactured.
• Magnetic stick with handle is also available.

Approx. Rs 2,200 / PieceGet Latest Price

• Used for removing ferrous chips or particles from blind or tapping holes, corners or slots of machine table.
• Compact design, uses strong magnets.
• Magnet depth is 20mm from one end.
• Stainless steel body to avoid corrosion.
• Special sizes can also be manufactured.
• Magnetic stick with handle is also available.

Approx. Rs 1,800 / PieceGet Latest Price

• Used for removing ferrous chips or particles from blind or tapping holes, corners or slots of machine table.
• Compact design, uses strong magnets.
• Magnet depth is 20mm from one end.
• Stainless steel body to avoid corrosion.
• Special sizes can also be manufactured.
• Magnetic stick with handle is also available.

Approx. Rs 1,900 / PieceGet Latest Price

• Used for removing ferrous chips or particles from blind or tapping holes, corners or slots of machine table.
• Compact design, uses strong magnets.
• Magnet depth is 20mm from one end.
• Stainless steel body to avoid corrosion.
• Special sizes can also be manufactured.
• Magnetic stick with handle is also available.

Approx. Rs 1,500 / PieceGet Latest Price

• Used for removing ferrous chips or particles from blind or tapping holes, corners or slots of machine table.
• Compact design, uses strong magnets.
• Magnet depth is 20mm from one end.
• Stainless steel body to avoid corrosion.
• Special sizes can also be manufactured.
• Magnetic stick with handle is also available.

Approx. Rs 20,500 / PieceGet Latest Price

Features:

• The Permanent magnet system of these holding magnets creates a magnetic field between the center pole and the outer border of the holding surface.
• In addition to the permanent magnet, which creates the holding force, a coil is installed. When 24V= is applied to this switch - off coil a counter polemagnetic field is set up to neutralize the permanent magnetic field. As a result work - pieces can easily be removed.
• These holding magnets will preferably be used when long - term holding times are required and tools should be loosened by switching on the coil for a short period.

Approx. Rs 22,500 / PieceGet Latest Price

Features:

• The Permanent magnet system of these holding magnets creates a magnetic field between the center pole and the outer border of the holding surface.
• In addition to the permanent magnet, which creates the holding force, a coil is installed. When 24V= is applied to this switch - off coil a counter polemagnetic field is set up to neutralize the permanent magnetic field. As a result work - pieces can easily be removed.
• These holding magnets will preferably be used when long - term holding times are required and tools should be loosened by switching on the coil for a short period.

Approx. Rs 27,500 / PieceGet Latest Price

Features:

• The Permanent magnet system of these holding magnets creates a magnetic field between the center pole and the outer border of the holding surface.
• In addition to the permanent magnet, which creates the holding force, a coil is installed. When 24V= is applied to this switch - off coil a counter polemagnetic field is set up to neutralize the permanent magnetic field. As a result work - pieces can easily be removed.
• These holding magnets will preferably be used when long - term holding times are required and tools should be loosened by switching on the coil for a short period.

Approx. Rs 35,500 / PieceGet Latest Price

Features:

• The Permanent magnet system of these holding magnets creates a magnetic field between the center pole and the outer border of the holding surface.
• In addition to the permanent magnet, which creates the holding force, a coil is installed. When 24V= is applied to this switch - off coil a counter polemagnetic field is set up to neutralize the permanent magnetic field. As a result work - pieces can easily be removed.
• These holding magnets will preferably be used when long - term holding times are required and tools should be loosened by switching on the coil for a short period.

Approx. Rs 35,500 / PieceGet Latest Price

Features:

• The Permanent magnet system of these holding magnets creates a magnetic field between the center pole and the outer border of the holding surface.
• In addition to the permanent magnet, which creates the holding force, a coil is installed. When 24V= is applied to this switch - off coil a counter pole magnetic field is set up to neutralize the permanent magnetic field. As a result work - pieces can easily be removed.
• These holding magnets will preferably be used when long - term holding times are required and tools should be loosened by switching on the coil for a short period.

Approx. Rs 54,000 / PieceGet Latest Price

Features:

• Suitable for drilling & light Machining.
• Easy to operate.
• Saves time as mechanical clamps are avoided.
• Economical for operation & maintenance.
• Powerful holding with the magnet.
• Vertical lifting force is 35 to 40 kg per cm sq.

Approx. Rs 54,000 / PieceGet Latest Price

• All surfaces are hardened & ground for cat no. 80701
• Suitable for conventional & CNC Milling.
• Suitable for milling 1 to 3mm
• Economical for operation & maintainence.
• No accidents due to power failure.
• Slippering force 2.5 kg / cm2
• Vertical lifting force is 35 - 40 kg / cm2

Approx. Rs 50,000 / PieceGet Latest Price

• All surfaces are hardened & ground for cat no. 80701
• Suitable for conventional & CNC Milling.
• Suitable for milling 1 to 3mm
• Economical for operation & maintainence.
• No accidents due to power failure.
• Slippering force 2.5 kg / cm2
• Vertical lifting force is 35 - 40 kg / cm2

Approx. Rs 10,100 / PieceGet Latest Price

• Used for collecting ferrous particles & scrap from floor space.
• Good quality strong magnets are used.
• Wheels for easy movement on floor.
• Particles are released just by creating gap between bottom plate & magnetic assembly by using foot.
• Long handle for easy working.
• Also available in steel wheel.

Approx. Rs 11,500 / PieceGet Latest Price

• Used for collecting ferrous particles & scrap from floor space.
• Good quality strong magnets are used.
• Wheels for easy movement on floor.
• Particles are released just by creating gap between bottom plate & magnetic assembly by using foot.
• Long handle for easy working.
• Also available in steel wheel.

Approx. Rs 8,500 / PieceGet Latest Price

• Used for collecting ferrous particles & scrap from floor space.
• Good quality strong magnets are used.
• Wheels for easy movement on floor.
• Particles are released just by creating gap between bottom plate & magnetic assembly by using foot.
• Long handle for easy working.
• Also available in steel wheel.

Approx. Rs 1,10,000 / PieceGet Latest Price

• Used for lifting & handling of ferromagnetic particles.
• Strong magnetic field to lift large quantity of particles.
• Particles are detached by separating lower plate form upper magnetic body.
• Magnetic Sweeper can fit to any forklift.

Approx. Rs 1,70,000 / PieceGet Latest Price

• Used for lifting & handling of ferromagnetic particles.
• Strong magnetic field to lift large quantity of particles.
• Particles are detached by separating lower plate form upper magnetic body.
• Magnetic Sweeper can fit to any forklift.

Approx. Rs 1,50,000 / PieceGet Latest Price

• Used for lifting & handling of ferromagnetic particles.
• Strong magnetic field to lift large quantity of particles.
• Particles are detached by separating lower plate form upper magnetic body.
• Magnetic Sweeper can fit to any forklift.

Approx. Rs 1,450 / PieceGet Latest Price

• Used for removing ferrous chips or particles from blind or tapping holes, corners or slots of machine table.
• Compact design, uses strong magnets.
• Magnet depth is 20mm from one end.
• Stainless steel body to avoid corrosion.
• Special sizes can also be manufactured.
• Magnetic stick with handle is also available.