Magnetic Chuck

Approx. Rs 89,100 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so / hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30 - 50% more then IS specification.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, temperature rise test, Electrical & Demagnetizing tests.
• Also available in Longitudinal Poles.
• We also manufacture Special chucks to suit individual requirements.
• Good quality & standard electrical accessories.

Approx. Rs 74,200 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so / hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30 - 50% more then IS specification.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, temperature rise test, Electrical & Demagnetizing tests.
• Also available in Longitudinal Poles.
• We also manufacture Special chucks to suit individual requirements.
• Good quality & standard electrical accessories.

Approx. Rs 78,000 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so / hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30 - 50% more then IS specification.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, temperature rise test, Electrical & Demagnetizing tests.
• Also available in Longitudinal Poles.
• We also manufacture Special chucks to suit individual requirements.
• Good quality & standard electrical accessories.

Approx. Rs 83,000 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so / hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30 - 50% more then IS specification.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, temperature rise test, Electrical & Demagnetizing tests.
• Also available in Longitudinal Poles.
• We also manufacture Special chucks to suit individual requirements.
• Good quality & standard electrical accessories.

Approx. Rs 1,43,000 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so / hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30 - 50% more then IS specification.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, temperature rise test, Electrical & Demagnetizing tests.
• Also available in Longitudinal Poles.
• We also manufacture Special chucks to suit individual requirements.
• Good quality & standard electrical accessories.

Approx. Rs 37,500 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so / hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30 - 50% more then IS specification.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, temperature rise test, Electrical & Demagnetizing tests.
• Also available in Longitudinal Poles.
• We also manufacture Special chucks to suit individual requirements.
• Good quality & standard electrical accessories.

Approx. Rs 42,000 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so / hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30 - 50% more then IS specification.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, temperature rise test, Electrical & Demagnetizing tests.
• Also available in Longitudinal Poles.
• We also manufacture Special chucks to suit individual requirements.
• Good quality & standard electrical accessories.

Approx. Rs 67,500 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so / hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30 - 50% more then IS specification.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, temperature rise test, Electrical & Demagnetizing tests.
• Also available in Longitudinal Poles.
• We also manufacture Special chucks to suit individual requirements.
• Good quality & standard electrical accessories.

Approx. Rs 56,200 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so / hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30 - 50% more then IS specification.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, temperature rise test, Electrical & Demagnetizing tests.
• Also available in Longitudinal Poles.
• We also manufacture Special chucks to suit individual requirements.
• Good quality & standard electrical accessories.

Approx. Rs 61,700 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so / hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30 - 50% more then IS specification.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, temperature rise test, Electrical & Demagnetizing tests.
• Also available in Longitudinal Poles.
• We also manufacture Special chucks to suit individual requirements.
• Good quality & standard electrical accessories.

Approx. Rs 94,100 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so / hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30 - 50% more then IS specification.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, temperature rise test, Electrical & Demagnetizing tests.
• Also available in Longitudinal Poles.
• We also manufacture Special chucks to suit individual requirements.
• Good quality & standard electrical accessories.

Approx. Rs 1,16,100 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so / hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30 - 50% more then IS specification.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, temperature rise test, Electrical & Demagnetizing tests.
• Also available in Longitudinal Poles.
• We also manufacture Special chucks to suit individual requirements.
• Good quality & standard electrical accessories.

Approx. Rs 1,06,800 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so / hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30 - 50% more then IS specification.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, temperature rise test, Electrical & Demagnetizing tests.
• Also available in Longitudinal Poles.
• We also manufacture Special chucks to suit individual requirements.
• Good quality & standard electrical accessories.

Approx. Rs 1,79,400 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so / hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30 - 50% more then IS specification.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, temperature rise test, Electrical & Demagnetizing tests.
• Also available in Longitudinal Poles.
• We also manufacture Special chucks to suit individual requirements.
• Good quality & standard electrical accessories.

Approx. Rs 30,400 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so/hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30-50% more than IS specification.
• Fine Pitch 6.5 mm makes it suitable to hold thin & small jobs.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, Temperature rise test, electrical & demagnetizing tests.

Approx. Rs 89,700 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so/hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30-50% more than IS specification.
• Fine Pitch 6.5 mm makes it suitable to hold thin & small jobs.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, Temperature rise test, electrical & demagnetizing tests.

Approx. Rs 97,750 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so/hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30-50% more than IS specification.
• Fine Pitch 6.5 mm makes it suitable to hold thin & small jobs.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, Temperature rise test, electrical & demagnetizing tests.

Approx. Rs 1,11,090 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so/hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30-50% more than IS specification.
• Fine Pitch 6.5 mm makes it suitable to hold thin & small jobs.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, Temperature rise test, electrical & demagnetizing tests.

Approx. Rs 1,39,150 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so/hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30-50% more than IS specification.
• Fine Pitch 6.5 mm makes it suitable to hold thin & small jobs.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, Temperature rise test, electrical & demagnetizing tests.

Approx. Rs 41,400 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so/hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30-50% more than IS specification.
• Fine Pitch 6.5 mm makes it suitable to hold thin & small jobs.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, Temperature rise test, electrical & demagnetizing tests.

Approx. Rs 47,150 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so/hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30-50% more than IS specification.
• Fine Pitch 6.5 mm makes it suitable to hold thin & small jobs.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, Temperature rise test, electrical & demagnetizing tests.

Approx. Rs 63,480 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so/hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30-50% more than IS specification.
• Fine Pitch 6.5 mm makes it suitable to hold thin & small jobs.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, Temperature rise test, electrical & demagnetizing tests.

Approx. Rs 77,280 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so/hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30-50% more than IS specification.
• Fine Pitch 6.5 mm makes it suitable to hold thin & small jobs.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, Temperature rise test, electrical & demagnetizing tests.

Approx. Rs 69,900 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so/hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30-50% more than IS specification.
• Fine Pitch 6.5 mm makes it suitable to hold thin & small jobs.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, Temperature rise test, electrical & demagnetizing tests.

Approx. Rs 89,100 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so/hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30-50% more than IS specification.
• Fine Pitch 6.5 mm makes it suitable to hold thin & small jobs.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, Temperature rise test, electrical & demagnetizing tests.

Approx. Rs 92,699 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so / hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30 - 50% more than IS specification.
• Fine Pitch ( 1 + 0.5 ) makes it suitable to hold very thin & small jobs.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, Temperature rise test, Electrical & Demagnetizing tests.
• Good quality & standard electrical accessories.
• We also manufacture Special chucks to suit individual requirement.

Approx. Rs 72,100 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so / hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30 - 50% more than IS specification.
• Fine Pitch ( 1 + 0.5 ) makes it suitable to hold very thin & small jobs.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, Temperature rise test, Electrical & Demagnetizing tests.
• Good quality & standard electrical accessories.
• We also manufacture Special chucks to suit individual requirement.

Approx. Rs 64,900 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so / hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30 - 50% more than IS specification.
• Fine Pitch ( 1 + 0.5 ) makes it suitable to hold very thin & small jobs.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, Temperature rise test, Electrical & Demagnetizing tests.
• Good quality & standard electrical accessories.
• We also manufacture Special chucks to suit individual requirement.

Approx. Rs 1,44,200 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so / hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30 - 50% more than IS specification.
• Fine Pitch ( 1 + 0.5 ) makes it suitable to hold very thin & small jobs.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, Temperature rise test, Electrical & Demagnetizing tests.
• Good quality & standard electrical accessories.
• We also manufacture Special chucks to suit individual requirement.

Approx. Rs 48,950 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so / hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30 - 50% more than IS specification.
• Fine Pitch ( 1 + 0.5 ) makes it suitable to hold very thin & small jobs.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, Temperature rise test, Electrical & Demagnetizing tests.
• Good quality & standard electrical accessories.
• We also manufacture Special chucks to suit individual requirement.

Approx. Rs 2,38,550 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so / hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30-50 % more than IS specification.
• Fine Pitch 5mm makes it suitable to hold thin & small jobs.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, Temperature rise test, electrical & demagnetizing tests.
• Also available in Longitudinal Poles.

Approx. Rs 1,30,200 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so / hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30-50 % more than IS specification.
• Fine Pitch 5mm makes it suitable to hold thin & small jobs.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, Temperature rise test, electrical & demagnetizing tests.
• Also available in Longitudinal Poles.

Approx. Rs 1,70,100 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so / hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30-50 % more than IS specification.
• Fine Pitch 5mm makes it suitable to hold thin & small jobs.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, Temperature rise test, electrical & demagnetizing tests.
• Also available in Longitudinal Poles.

Approx. Rs 1,46,600 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so / hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30-50 % more than IS specification.
• Fine Pitch 5mm makes it suitable to hold thin & small jobs.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, Temperature rise test, electrical & demagnetizing tests.
• Also available in Longitudinal Poles.

Approx. Rs 74,500 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so / hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30-50 % more than IS specification.
• Fine Pitch 5mm makes it suitable to hold thin & small jobs.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, Temperature rise test, electrical & demagnetizing tests.
• Also available in Longitudinal Poles.

Approx. Rs 61,100 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so / hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30-50 % more than IS specification.
• Fine Pitch 5mm makes it suitable to hold thin & small jobs.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, Temperature rise test, electrical & demagnetizing tests.
• Also available in Longitudinal Poles.

Approx. Rs 40,000 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so / hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30-50 % more than IS specification.
• Fine Pitch 5mm makes it suitable to hold thin & small jobs.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, Temperature rise test, electrical & demagnetizing tests.
• Also available in Longitudinal Poles.

Approx. Rs 47,500 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so / hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30-50 % more than IS specification.
• Fine Pitch 5mm makes it suitable to hold thin & small jobs.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, Temperature rise test, electrical & demagnetizing tests.
• Also available in Longitudinal Poles.

Approx. Rs 29,000 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so / hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30-50 % more than IS specification.
• Fine Pitch 5mm makes it suitable to hold thin & small jobs.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, Temperature rise test, electrical & demagnetizing tests.
• Also available in Longitudinal Poles.

Approx. Rs 1,17,500 / PieceGet Latest Price

• Work holding device for surface grinding machines.
• Each pole is having separate coil, so / hence very strong & even magnetic flux is generated.
• Accuracy as per IS : 8710 - 1978.
• Magnetic pull is 30-50 % more than IS specification.
• Fine Pitch 5mm makes it suitable to hold thin & small jobs.
• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
• Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, Temperature rise test, electrical & demagnetizing tests.
• Also available in Longitudinal Poles.